Out of stock

LM2596 Stepdown with Display


  • Module Properties: non-isolated constant voltage module
  • Rectification: non-synchronous rectification
  • Input voltage: 4.5V-35V
  • Output Voltage(Less than input): 1.3V-30V
  • Output current: 3A maximum
  • Conversion efficiency: 92% (maximum)
  • Switching frequency: 150KHz
  • Output ripple: 50mV (maximum) 20M-bandwidth
  • Load regulation: ± 0.5%
  • Voltage regulation: ± 2.5%
  • Operating temperature: -40 ℃ to +85 ℃
  • Size: 66 * 35 * 14 mm

Out of stock

SKU: MD1057 Categories: , ,


On Board Voltmeter

  • Use on board switch to change display measurement between the input or output voltage, and a LED indicate which value(IN/OUT) is being measured. This setting is stored even after power off.
  • Voltmeter can be turned off, just keep the switch pressed for 1 second and leave it.
  • Adjust Input and output voltage measurement error offset – long press switch for 4 seconds or more, the digital display flashes, then short press the button to change the value of output (values range from -0.5 to 0.5, the unit is V), a positive number indicates an upward calibration, negative downward calibration. Now press the button again for adjust input offset in same manner.