4-Axis USB Mach 3 RNR Eco Motion Controller v2.0 100KHz (with Drivers + Copy of Mach3 Software and 1.5m USB cable)




No of Axis: 4  (you can connect four stepper motor drives or servo drives)
Maximum step-pulse frequency: 100KHz  (suitable for smooth servo or stepper motion)
Automatic probe tool Support: Yes
Emergency input: Yes
Limit switches: Yes (4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device)
Electronic handwheel Support: Yes
Optical Isolation between USB Side Control and External inputs: Yes
External Voltage: 12V/24V
Spindle Control Output: Yes (0-10V output port)
Isolated Outputs: 4 general-purpose isolated relay drive output interface (can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device)
Status LED: 1 Status LED (indicate connection status of the controller board)
Size: 8×7.7cm /3.15×3.03inch
Tested with following Operating Systems:
Windows XP (direct)
Windows 7 64bit /32Bit (direct)
Windows 10 7 64bit /32Bit (direct)


4-Axis 100KHz USB CNC Controller Card for Mach3 lets you use any Windows Computer to be used as CNC Machine Controller. Previously with LPT Port Based Cards, user were limited to use only older computers which had LPT Port. With this New CNC Control Board you can even run Mach3 on a Windows Tablet which can give more compact and professional look to your CNC Machine.


in the box:

1x 4-Axis 100KHz USB CNC Motion Controller Card for Mach3
1x USB Cable
1x Software CD/DVD